Eco Traffik 2K (A+B)

Shake well before use.
ECOTRAFFIK 2K, catalysed according to the indicated ratio and
mixed thoroughly, has to be applied to filled, sanded and
vacuumed wooden floors. When working conditions are critical (hot temperatures, low humidity or large areas), it is advisable to add 5-10% of retardant DILUENTE DR H20 (see technical data sheet). Apply the finish evenly with a smooth flowing action avoiding accumulations and any risk of overlapping. A second coat of ECOTRAFFIK 2K can be applied after 4 hours without sanding or after 24 hours with a previous light sanding using a 220 paper grit. During the application it is very important to apply the lacquer along the wood grain. A third coat of ECOTRAFFIK 2K can be applied, following the previously mentioned guidelines. In order to achieve better results and higher softness to the touch, it is advisable to sand after each coat. Very good results can be achieved by applying a first coat of ECOPRIME HS 120 (see technical data sheet), sanding and applying one or two coats of ECOTRAFFIK 2K. For a more intense coloration of the wood it is advisable to use as first coat ECOCROM (see technical data sheet).
In case of application of ECOTRAFFIK 2K directly on wood with
tannin content is advisable to make a preliminary test.
The maintenance of wooden floors treated with ECOTRAFFIK 2K
has to be done by VELUREX range of products (see technical data sheets).